Pictures of additional B9 parts for sale.

Picture of my tread section with the slightly under size belts on it, looks good to me.

This is the second set of tread belts, very nice and durable, cord reinforced, not long enough to go completely around with one seem, but I will include a piece of different belt material to seem together in the non visual spots to make a complete loop. These could not be used to drive the robot, only for non moving displays. These also are a little narrower than the club spec, with the 1" wide being about 7/8" and the other at 1", the one inch would need cut down to 7/8" to match. The set on my robot are undersize in width like this and look fine, check out the picture.

First set of tread belts, softer rubber, long enough to have only one seam except for one of the 1" wide it would need two seams. These are nice, pretty close to club spec, soft, and cannot be used to drive the robot, these would be for display only.

This is a picture of my B9, externally almost complete, much automation still in progress internally, at Steel City Con, February 26 - 28, 2010.

B9 Progress pictures

Well, after 3 years its finally starting to look like a B9, of sorts.........